Bersa Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
15 Posts
Discussion Starter · #1 ·
I thought I saw something here but can't find it...

Does the TPR9 magazine fit the compact, if so is a sleeve available?

Thanks
 

·
Registered
Joined
·
127 Posts
I think it does. But it’d stick out the bottom obviously. As far as I know there’s no sleeve available that I can find.
 

·
Premium Member
Joined
·
835 Posts
  • Like
Reactions: Beowulf

·
Registered
Joined
·
2 Posts
Way back in 2019 I got me a ProMag BRA-A2 17 round mag. As of this posting, it's still listed on their site at $25.99.

Works great in my TPR9C having a couple of 17+1 run throughs of Speer, S&B and MagTech without a hiccup.

The fit is good but my pinky finger was, like, "And I'm to do what with this??" I set out for a solution.

Using o-rings, I came up with a red neck magazine adapter.

Ran another five more 17+1's without a problem. More importantly, pinky is happy.

The o-rings are 02-1570P and 02-1620P. Also numbered as #69 R-75 and #68 R-83. I don't recommend the combination I needed to effect the necessary fit. Buy six of each and and work it out should you decide to go with a 17'er, ProMag or Bersa.

The only downside for the ProMag is the release cut-out on the left side only, negating a TRP9C right side release button configuration.

Revolver Gun barrel Wood Electric blue Gun accessory
 
1 - 6 of 6 Posts
Top