Bersa Forum banner

Sight options?

2019 Views 3 Replies 3 Participants Last post by  Valent
I bought the standard Thunder 380 because I mainly didn't like the little specks they called sights on the BT380CC. I only wish they'd have compromised between the sights for the regular design and the CC one and gave the regular one a more streamline front sight.

Can these be changed to something more draw friendly? Not as small as the CC, but not the grappling hook on the front that is there now...
1 - 4 of 4 Posts
I did about 15 minutes worth of searching on the internet for aftermarket sights for your BT380CC...

No luck...sorry!
Thanks. Didn't have to look that hard though!
I bought the standard Thunder 380 because I mainly didn't like the little specks they called sights on the BT380CC. I only wish they'd have compromised between the sights for the regular design and the CC one and gave the regular one a more streamline front sight.

Can these be changed to something more draw friendly? Not as small as the CC, but not the grappling hook on the front that is there now...
Inlarged rounded 380cc sights would not be a bad idea, but you go and tell it to Bersa. Their program seems to be fairly conservative and not open for new trends of platforms with diferent mag sizes and dovetails which accept various aftermarket sights.
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top