CCW advice required...

Discussion in 'Holsters and Cases' started by metalman40, May 8, 2013.

  1. metalman40

    metalman40 New Member

    2
    0
    I currently carry a PK380 but I'm not comfortable with the safety mechanism of this weapon. I've decided to get a Thunder and what I want to know is if anyone has found a comfortable shoulder rig which will handle the Thunder and an attached laser or do I need to use crimson trace grips?
     
    Last edited by a moderator: May 8, 2013
  2. SHOOTER13

    SHOOTER13 RETIRED MODERATOR Lifetime Supporter

    5,638
    170
    Welcome to the Bersa Firearms Forum metalman40 !!
     

  3. David

    David Well-Known Member Lifetime Supporter

    507
    0
    First of all, welcome to the family! What kind of Bersa do you plan to carry?
     
  4. LT2108

    LT2108 Administrator Staff Member Administrator Supporter

    6,105
    12
    Welcome to the Bersa Firearms Forum !
     
  5. metalman40

    metalman40 New Member

    2
    0
    My plan is to get a thunder in .380 CC with the trigger gaurd mounted laser. I have talked to my gunsmith and he has seen very few problems with the Bersas he's sold but has never carried one himself. My main peeve with the Walther is it doesn't decock when you put the safety on and I get confused if the gun is on safe or not. I want to be sure when I hang a piece on my body what condition it's in.
     
  6. David

    David Well-Known Member Lifetime Supporter

    507
    0
    Mine always stays loaded, in chamber, hammer down, safety off. The long DA trigger pull is more than enough safety.
     
  7. jpshaw

    jpshaw Well-Known Member

    625
    0
    Ditto David's post above. Loaded, chambered, safety (if it has one) off and hammer down. BTW Welcome to the forum.