Bersa Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
Hello, need help. My bersa thunder 380 is having issues. It was not firing. The hammer is not dropping. I had it cleaned but after 2 shots have the same issue.
Can anyone please help me with this, what do I need to do?

Many thanks and a Very Happy Thanksgiving to you all.

Hassan
 

·
Registered
Joined
·
116 Posts
Hello Hassan....
Just a guess here- if you remove the right side grip....can you see if the trigger-transfer bar is staying place while you pull the trigger? There is a washer and "c" clip that holds it in place.

Edit: If the c clip falls off, then the washer can come of and the end of the transfer bar will be loose.
 

·
Registered
Joined
·
116 Posts
Got a chance to snap a pic about above transfer bar/C clip. Just forward of the hammer you can see the washer and 'c' clip over the end of the transfer bar. If that c clip comes off then the result "can be" what you are describing.
Take the right side grip off and look at it. If it is missing- it is possible it may still be laying inside the grip frame.
Good luck....


EDIT: This is a BT380 CC- but the operation is similar to the BT380.




Air gun Trigger Gun barrel Gun accessory Starting pistol
 
1 - 6 of 6 Posts
Top